What is the best way to spray on metallic paint with a spraygun/compresser getting the paint to go on even?

get a professional to do it. if you do it yourself you will have runs.
What is the best way to spray on metallic paint with a spraygun/compresser getting the paint to go on even?
go to a pro..not worth the risk of your whip looking like ****
What is the best way to spray on metallic paint with a spraygun/compresser getting the paint to go on even?
Smooth even strokes, start spraying before you begin the sweep of the panel by pressing the triger half way and then all the way.


Continue to spray past the panel and release, then do the same on the way back.





You want a 50/50 cover pattern, that is the say as your spray one way, on your way back you should be covering half of the paint you just put down, and so on.





That should get the paint on even. Make sure your ground coat / primer is smooth and even first however or it will all go wrong.





If your using a 2K paint and your first coat looks bad then you need to flat it back and start again.


With 2K dont spray a dry coat first, put it on wet.